▄▓▓▄ ▄░▌ ▄░▌ ▄█▄ vlr^ACiD ▄▓▓
▄▓█▓▒▐▓▄▄ ░ ▄▄█▓▒▄▄ ▄█▓▒▌░ ▄█▓▒▌ ░ ▄▓▒███▄▄ ▄▓█▓▒
░ ▄▄▓▒▀▐█▓░██▀▒█▓▄ ▄▓▒▀ ▀▓▒ ▄▄▓▒▀▐▓▓▌▄▄▓▒▀▐▓▓▌ ▄▄▓▒▀▐▀▄██▀▒█▓▄ ░ ▄▄▓▒▀▐█▓▒
▄█▓▒▀ ▀▀▀▓█ ▀█████▌ ░ ▐██▓▓▀ ▀▀██▓▒▀ ▀▀▀ ▓██▀ ▄▓▌█▓ ▀██▓▄ ▓█▓▒ ▐█▓░
▐███▌ ░ ▒▓█ ▐████ ░ ▓██▌░ ▐██▌░ ░▓█▌░ ▐▌▒ ▒▓ ▐██████▓ ░ ▀▀▀▀
▓▓██ ░ ▓▓█ ░ █▓█▌ ░ ▓▌▀▀▀▀▀█▄▄▀▀▀▀▀▀█▄▄▀▓█ ░ ▀ ▓█ ░ ██████▌
▒▓██ ░ ▒▓█ ░ ▐▓▓▀█ ░ ▒▌░█▀ ▐▓▓█▄█ ▐▓██▐█▄▄ ▄▓█▌█▒ ░ ▐█▓▓▐▓████ ░
░▓██▌ ▄▄▄▄██ ▄▄██▀▐▒▌ ▐█▐▒▌░ ▒▓███▌░ ▓▓████▀▀ ▒▓███▓ ▄▄▒█▀ ░▒█▌ ▒█▄▄
▐▓▓██▄ ▓█▓▒█▓ ▀█▓▒▄▀▓▄ ▄▓▀▒▓█▄▄████▀██▄▄▒███▀▓█ ▒▓████ ▀█▓▒▄▐▓▒█▄ ▐▓█▓█
▀▒▓██▒▄▓█▓▓▀▒ ░ ▐█▓▓█▀▀█▓▒▀▀▐▓▓▓█▀▀▀ ▄░▒▓█▀▀▀ ▒▓█ ░ ░▓█▓██ ░ ▐█▓▓█▀░▓█▒▄░▒█▓▒
▄▄ ▀▀█████▓▓▌ ▄▄ ▀█░▒▓▌ ▄▄ ▄▄▄▄▄▄ ▄▄ ▄▄▄▄▄▄▄▄ ▄▄▄▄▄ ▄▄▄▄▄▄▄ ▄▄ ▀█░▒▓▌ ▀▀█████▓▒
▀▀▀▓▒ ▀▀ ▀▀ ▀▀▀▓░
SatPC32 v12.6 for European Users (c) Erich Eichmann, DK1TB on 02\2007
The respectable size of the release is 04 disks @ 2.88MB a piece
And the protection defeated was a lame implement of: Other
The cracktype you got to apply is a: Other
You will need a puter running the following OS: Windows
─ ─-─── ──────────────────────────────────────────────────────────── ──-─ ─
The programs SatPC32.Exe (in the following: SatPC) and Wisat32.Exe (in the
following: Wisat) calculate the tracks of earth orbiting satellites. The
calculations are based on the SGP4/SDP4 model, the results therefore are
highly accurate.
Both programs are included in the SatPC32 program package.
SatPC displays the audibility-areas of one or several selected satellites
within a world-map and shows the results in text-lines below the map.
Wisat represents the satellite positions in real-time in list-form. Both
programs update their calculations continuously in steps of one second.
The differences between SatPC and Wisat result from the absence of the
graphic output in Wisat.
SatPC and Wisat steer the antennas and radio frequencies (CAT) for
Doppler correction. Both programs allow multitasking with programs that
provide data transfer with satellites like Wisp32. SatPC32 and Wisat32
then will take over the antenna- and frequency-control. The automatic
switching on a satellite works synchronized with the data-program.
The automatic Doppler correction also works with ssb transponders like
FO-20, FO-29, AO-10, AO-40.
The antenna-control steers the AMSAT Rotor Interface and the
ready-appliance IF-100.
Further, the following interfaces and controllers are supported:
RIF-PC ( Orbitronic) ,
WinRotor32 (Funkbox ,Parallel port and USB version),
ARS (EA4TX ),
HalloRotor ( DB3DH),
Fodtrack-Interface (XQ2FOD),
Kansas City Tracker /Tuner (KCT/T),
Yaesu GS-232 and compatible interfaces (G6LVB-Tracker, AlfaSpid, DL7AOT,
CX6DD, SatDrive),
SAEBRTrackBox (N8MH),
Satellite Tracker Mini, Junior, Senior (W0LMD), (driver file is beta
version),
SatEL interface (Satellite Electronics),
Egis-Rotoren,
Labjack U12 (USB Controller / PiggyBack (NLSA),
Labjack U3 (USB Controller, see page 'Downloads'),
LVB Tracker,
AlfaSpid controller.
Driver programs for these devices are included (or are delivered with the
hardware), which take the data for rotor- and CAT control via DDE from
the main-programs SatPC32 and Wisat32. At the end of this section you
will find as an exemple a screen copy of the driver-program for the KCT
(ServerKCT.Exe).
The frequency- and mode-control works with the following radios:
Yaesu transceivers FT-736R, FT-847, FT-817, FT-857 and FT-897,
Kenwood transceivers TS-790E/A and TS-2000,
ICOM transceivers IC-820, IC-821 and IC-910H,
ICOM receivers and transmitters, that work with the same cat protocol
(i.e. IC-275, IC-475).
The programs will work also with serveral other models, this has to be
tested, however.
In Vfo mode the radios supported by SatPC32 (except the Yaesu FT-736R, s.
below) can be tuned with the Vfo as well as via the PC mouse and
keyboard in selectable frequency-steps of 20, 100, 500 Hz, 1 KHz and 5
KHz.
Tuning with the Vfo is the most comfortable way, tuning via the PC,
however, allows fast and precise QSY, which can be helpful, when QRM is
coming up on the frequency.
The Yaesu FT-736R can be tuned only via the PC as described above. Since
it's Vfo frequency can not be read, it can not be tuned with the Vfo knob.
The output of the rotor- and CAT-control can be sent to a DDE interface
instead to the parallel or serial port. So the data can be taken over by
other programs. This happens with the applications for the rotor- and
CAT-systems named above (besides the IF-100, which is steered directly).
Further, the program provides a constantly active DDE interface, which
allows third-party-programs to receive the antenna positions, frequencies
and modes calculated by SatPC32. This interface -in example - can be used
by CX6DD's WispDDE. Thus all hardware supported by WispDDE can be
controlled also by SatPC32.
A particular interface allows cooperation with Uni_Trac 3000. Therefore
all hardware supported by that program can be steered with SatPC32, too (
beyond the devices supported by SatPC32 itself).
The programs run on IBM-compatible PCs on WINDOWS 95/98,ME, Windows NT,
Windows 2000 and Windows XP. As far as I know SatPC32, Wisat32 and
DDESat32 ( see below) are the only 32-bit-programs at present time, that
provide rotor-control with the IF-100 and RifPC and a rotor- and
frequency-control with the Kansas-City-Tracker/Tuner on WinNT 4.0 and
Windows 2000.
The programs support the 120 dpi fonts (available at screen solutions of
800 * 600 or higher), but not user-defined. For solutions of 800 * 600
and higher additional bit maps are included. With these maps SatPC fills
the screen at 1024 * 768 for about 90%.
The programs can show times in UTC or alternatively in the observer's
local time.
─ ─-─── ──────────────────────────────────────────────────────────── ──-─ ─
1. Unpack the release.
2. Install it.
3. Use the following data to register.
FI1RE
CROSS
FIRE
FH50116104
─ ─-─── ──────────────────────────────────────────────────────────── ──-─ ─
CROSSFiRE YOUR FAVOURITE SWEDISH VODKA SINCE 2000
Last update was in 2000