▄▄ ▄▄▄ ▀▀
▄▄██▀ ▄▄█▀ ▄▄██████▄
▄▄█▀███▀ ▄██▀ ▄██▀▀ ▀███
▄█▀ ▄▄█▀▀ ▄███ ▄███ ▄█████▄▄▄██▀▀ ▀█▄
▀██▄▄▄ ▄▄▄████▀▀▀████ ▄███ ▄███▀█▄▄▄▄ ▄▄▄██▀
▀███████████▀▀ ▀███ ▀███▄ ▀▀█▄ ▀▀▀████████████▀
▄▄███▄▄▄ ▀▀▀▀▀ ▄ ▀▀█▄▄ ▀▀▀▀ ▄ ▀▀▀▀▀▀ ▄▄▄███▄▄
▄███▀▀▀▀███▄▄▄ ▄▄▄██▀ ▀██▄▄▄ ▄▄▄███▀▀▀▀███▄
███ ▀▀▀▀▀▀▀ PROUDLY PRESENTS ▀▀▀▀▀▀▀▀ ███
██▄ ▄██
█▄ Roger.Nichols.Digital.SPL-ICER.VST.RTAS.v1.01 ▄█
█ █
▀█ █▀
█ SUPPLIER ..: TEAM AiR █
█ PROTECTION : PACE\iLOK █
█ SIZE ......: 02 * 4,77MB █
█ DATE ......: 10/2007 █
█ █
█ █
█ The SPL-IZER is an adjustable 3 band 24db per octave █
█ FIR (Finite Impulse Response) frequency splitter that █
█ allows the three bands to be isolated and routed to █
█ aux or instrument tracks for separate processing. The █
█ use of FIR filters ensures that no phase shifting █
█ occurs at the frequency split points. With this tool, █
█ one can use for example ones favorite single band █
█ compressor (let's say uhm.. Dynam-izer) and make it 3 █
█ band. █
█ █
█ There is of course a myriad of potential uses. One █
█ use we found was to use the Spl-izer in front of the █
█ reverb auxes. No reverb on the low end, the original █
█ reverb on the mid section and the same reverb but █
█ with reduced decay on the high end. Acoustic rhythm █
█ guitar track run through the Spl-izer: low end muted, █
█ mid section straight through and a short echo/ chorus █
█ only on the high end. █
█ █
█ █
█ Features █
█ █
█ █
█ Spl-izer features user adjustable frequency split █
█ point and audio levels. █
█ █
█ The low to mid split point can be set from 80Hz to █
█ 1475 Hz. █
█ █
█ The mid to high split point from 80Hz to 16kHz. █
█ █
█ The user can choose between using Hanning or Blackman █
█ windows. █
█ █
█ The various level meters feature RNDigital's █
█ proprietary +8db input meter █
█ █
█ with peak and RMS level indicators. █
█ █
█ The direct output of the plug-in can be switched █
█ between Mute, Sum, Low Band, █
█ █
█ Mid Band and High Band for instant monitoring. █
█ █
█ The three bands created by the the splitter each have █
█ their own level meter █
█ █
█ and adjustable gain. █
█ █
█ The plug-in makes these signals available to your DAW █
█ as individual busses. █
█ █
█ The Spl-izer created buss signals ( SPL-IZER LOW, █
█ SPL-IZER MID and SPL-IZER HI) can then be insterted █
█ as input on any other track for further processing. A █
█ large Band level meter indicates both the crossover █
█ points and the audio level of each band. █
█ █
█ █
█ █
█ http://www.rogernicholsdigital.com █
█ █
█ █
█ █
█ █
█ █
█ Installation Notes : █
█ -------------------- █
█ █
█ 1) Unzip, Unrar and run Setup.exe █
█ █
█ 2) Enjoy this fine Team AiR release !!! █
█ █
█ █
█ █
█ █
▄█ █▄
▄█ █▄
▄█▀ ▀█▄
▄██▀ ▀██▄
███ ███
▀██▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄ ▄ ▄ ▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄██▀
▀▀███▄▄▄▀▀ nFO lAYOUT (c) 2006 bEARCAVE-dESIGN ▀▀▄▄▄███▀▀